One of the minor pleasures in life that most of us take for granted is fresh, filtered water drawn directly from the refrigerator. However, to ensure that you continuously enjoy water that is as fresh as that natural mountain stream, you must know how to install a refrigerator water filter and its proper maintenance. This blog post will demonstrate how to get the most out of the refrigerator’s water filter and achieve the best Water quality.

Why Use a Refrigerator Water Filter?

Refrigerator water filters have a significant role in improving water’s taste and quality within the refrigerator. They filter out chlorine, lead and sediment and produce water that is cleaner and tastes better. Here are some key benefits of using a refrigerator water filter:

  • Improved Taste:Carbon filters can remove bleaching agents such as chlorine and other impurities that may give water a sour taste and odour.
  • Reduced Contaminants:They assist in filtering a number of disastrous elements, such as lead, mercury, and other toxic elements, that may be present in your water supply.
  • Clearer Ice:Filtered water results in clearer ice cubes with no traces of cloudiness or even other impurities.
  • Protected Appliances:Filters can prevent sediment buildup in your ice maker and water dispenser, which can become a problem if left unaddressed.

Identifying Your Filter Type and Location

The first thing that needs to be done is to identify the type of refrigerator water filter you have and the location of this part. Most refrigerator water filters fall into two main categories:

  1. Twist-on Filters: These filters are usually situated at the back of the grille, which is found in the lower section of your refrigerator. To remove them, unscrew the filter housing and twist the new filter clockwise until it locks into place.
  2. Push-in Filters: These filters may be located in the same area as twist-on filters, but they will need a button or lever to be pushed to remove an existing filter and insert a new one.

For details on the specific model you own, refer to your refrigerator’s user manual. It will give you clear guidelines on where to find or change your filter. If the manual is missing, you can often locate the filter replacement instructions by simply entering your refrigerator’s model number online.

Installing Your New Refrigerator Water Filter

Once you’ve identified your filter type and location, here’s a general guide on installing your new refrigerator water filter:

  1. Gather Supplies: You will require a new refrigerator water filter that is compatible with your refrigerator, a towel, and pliers if the old filter is hard to remove.
  2. Turn Off the Water Supply: Find the water supply shutoff valve, generally found outside, at the rear of the refrigerator. Twist the valve clockwise until it cannot be turned anymore to seal the main supply of water.
  3. Place a Towel Underneath: Sometimes, when you are removing some parts, water may drool down. Therefore, ensure that you place a towel beneath the filter housing to absorb any water that may drool down.
  4. Remove the Old Filter: If you are using a twist-on filter, turn it anti-clockwise; if you are using a push-in filter, press a button and pull the filter out. But as for the filter that is stuck inside, perhaps it is better to apply force gently and use pliers to get rid of the specks.
  5. Discard the Old Filter: Discard the used filter using the locality’s appropriate procedures. In some cases, people can return their water filters to the company, and they will recycle them.
  6. Prepare the New Filter: Some filters have a protective cap that must be unscrewed before the filter is placed in its usage position. If there are directions that you need to follow with the new filter, then this is the place to do so.
  7. Install the New Filter: For twist-on filters, simply screw the new filter into the unit, then twist it clockwise until it locks into place. In the case of push-in filters, twist the new filter clockwise until it clicks into place or put in a new filter and push it in as far as possible into the housing.
  8. Turn on the Water Supply: After ensuring that water pressure has been lost, gradually open the shut-off valve in an anticlockwise direction to regain the water supply.
  9. Run Water Through the Dispenser: Wash the dispenser with running water for several minutes to clear air bubbles and separate any loose carbon particles. Discard the flushed water.

Important Tip: Reset the filter indicator light of your refrigerator (if it has one) after placing the new filter. Check the owner’s manual for guidance on how and when to reset the indicator.

Maintaining Your Refrigerator Water Filter

Replacing the refrigerator water filter as required is essential to maintaining performance and ensuring Water quality reaches your refrigerator. The filters typically need to be replaced every six months, but if you have high usage or live in an area where the water is bad, it is necessary to change them every three months.

Here are some additional maintenance tips:

  • Keep a Spare Filter on Hand: It is wise to have another filter on standby so that if one is ever misplaced, destroyed, or damaged, you have a backup on hand, and you don’t have to go long without your filtered water.
  • Label the Installation Date: Always label the new filter with the installation date using a permanent marker. This is especially helpful for reminding you when to get a new one.
  • Clean the Filter Housing (Optional): Some manufacturers advise you to wet cloth when changing the filter and then wipe the filter’s housing. However, it is always recommended to consult the owner’s manual for proper cleaning guidelines for the particular model.

Finding the Right Refrigerator Water Filter

Finding the correct replacement filter for your refrigerator is essential. Here are a few tips:

  • Consult Your Owner’s Manual: The manual will also indicate the particular model number of filters compatible with your refrigerator.
  • Look for the Model Number on the Old Filter: Many refrigerator water filters have a model number on the filter itself.
  • Search Online: You can search on the internet using your refrigerator’s model number along with tags such as “refrigerator water filter” or “change filter for [Your Refrigerator Brand].
  • Trustworthy Retailers: When buying your refrigerator water filter, buy from a reputable appliance parts store or the manufacturer’s website.

Wellness Water Company: Your One-Stop Shop for Refrigerator Water Filters

At Wellness Water Company, we know that water is a basic necessity everyone deserves in its best state. That is why we supply refrigerator water filters that meet the highest standards and come in a range of types, including Frigidaire and KitchenAid refrigerator water filters.

To simplify the process, we have designed our site to be navigation-friendly. You can easily search for the filter model that fits your refrigerator perfectly. We also pay special attention to our product specifications and include helpful guidelines for replacing our products.

Visit Wellness Water Company and order your refrigerator water filter today. Then, be ready to enjoy clean, filtered water like never before.

Hopefully, this blog post contains the information you were looking for to assist with installing and maintaining your refrigerator water filter. With these few and easy steps followed, you can be guaranteed a continuous supply of good-tasting water just as you need it. Importantly, it is worth noting that using high-quality refrigerator water filters is not a waste of money because it’s a way of safeguarding your health.